Pro-Ject Record Puck PRO
Pro-Ject Record Puck PRO
190g stabilizing record weight • Nickel-plated aluminum construction • Felt underside to protect labels • Helps improve platter coupling for cleaner timing and depth
Meet the Record Puck PRO
The Pro-Ject Record Puck PRO is a precision-machined stabilizing weight designed to improve the mechanical coupling between your vinyl record and turntable platter. By applying controlled mass at the record center, it helps flatten minor warps, reduce unwanted micro-vibration, and promote more consistent energy transfer into the platter—often perceived as improved timing, firmer bass definition, and more stable imaging.
Fit note: Check your spindle height. With a record on the platter, exposed spindle height should be ≤ 10.5mm when using this puck.
Highlights & Benefits
- Improved record-to-platter contact — helps stabilize the disc for more consistent playback behavior.
- Reduced unwanted vibration — controlled mass can lessen micro-movement that smears transients and softens bass edges.
- Optimizes mildly warped records — assists with firmer seating against the platter surface for better tracking consistency.
- Label-safe underside — felt mat on the bottom helps protect the record label during use.
- Turntable-friendly mass — 190g is designed to deliver stabilization without over-burdening many quality bearings.
- Elegant, durable finish — the Pro-Ject Record Puck PRO uses nickel-plated aluminum for a premium appearance and long-term wear resistance.
Technology & Design
Mass coupling principle — record weights apply downward force at the center label area, improving contact and reducing the tendency for the disc to flex or vibrate during playback.
Nickel-plated aluminum body — a rigid, precision-machined structure designed for stable contact and consistent handling.
Felt underside interface — a protective layer that helps prevent label scuffing while maintaining secure, quiet contact.
Used with an appropriate platter mat and a well-isolated deck, the Pro-Ject Record Puck PRO can help tighten leading-edge clarity and improve perceived depth by stabilizing the record during playback.
FAQ — Record Puck PRO
Will it work with any turntable?
It is broadly compatible, but you should confirm spindle height clearance. With a record on the platter, exposed spindle height should be ≤ 10.5mm when using this puck.
Is a record weight the same as a clamp?
No. A weight relies on mass to improve coupling. A clamp typically uses a mechanical locking action. Both can be effective; the best choice depends on bearing design and platter/mat behavior.
Could it stress my turntable bearing?
At 190g, it is designed to be a sensible mass for many turntables. If your manufacturer advises against added platter loads, follow that guidance.
Does it help with warped records?
It can improve seating for mildly warped records by increasing contact at the center. Severe warps may still require record flattening or replacement.
Will it scratch my label?
The underside includes a felt interface intended to protect the label during normal use.
Why Buy From Us
- Compatibility guidance for spindle height and bearing/load considerations
- Setup recommendations for mats, isolation, and cartridge alignment to maximize results
- Accessories pairing help (brushes, cleaning, anti-static solutions)
- Careful fulfillment and long-term technical support
Pro-Ject Record Puck PRO
190g stabilizing record weight • Nickel-plated aluminum construction • Felt underside to protect labels • Helps improve platter coupling for cleaner timing and depth
Meet the Record Puck PRO
The Pro-Ject Record Puck PRO is a precision-machined stabilizing weight designed to improve the mechanical coupling between your vinyl record and turntable platter. By applying controlled mass at the record center, it helps flatten minor warps, reduce unwanted micro-vibration, and promote more consistent energy transfer into the platter—often perceived as improved timing, firmer bass definition, and more stable imaging.
Fit note: Check your spindle height. With a record on the platter, exposed spindle height should be ≤ 10.5mm when using this puck.
Highlights & Benefits
- Improved record-to-platter contact — helps stabilize the disc for more consistent playback behavior.
- Reduced unwanted vibration — controlled mass can lessen micro-movement that smears transients and softens bass edges.
- Optimizes mildly warped records — assists with firmer seating against the platter surface for better tracking consistency.
- Label-safe underside — felt mat on the bottom helps protect the record label during use.
- Turntable-friendly mass — 190g is designed to deliver stabilization without over-burdening many quality bearings.
- Elegant, durable finish — the Pro-Ject Record Puck PRO uses nickel-plated aluminum for a premium appearance and long-term wear resistance.
Technology & Design
Mass coupling principle — record weights apply downward force at the center label area, improving contact and reducing the tendency for the disc to flex or vibrate during playback.
Nickel-plated aluminum body — a rigid, precision-machined structure designed for stable contact and consistent handling.
Felt underside interface — a protective layer that helps prevent label scuffing while maintaining secure, quiet contact.
Used with an appropriate platter mat and a well-isolated deck, the Pro-Ject Record Puck PRO can help tighten leading-edge clarity and improve perceived depth by stabilizing the record during playback.
FAQ — Record Puck PRO
Will it work with any turntable?
It is broadly compatible, but you should confirm spindle height clearance. With a record on the platter, exposed spindle height should be ≤ 10.5mm when using this puck.
Is a record weight the same as a clamp?
No. A weight relies on mass to improve coupling. A clamp typically uses a mechanical locking action. Both can be effective; the best choice depends on bearing design and platter/mat behavior.
Could it stress my turntable bearing?
At 190g, it is designed to be a sensible mass for many turntables. If your manufacturer advises against added platter loads, follow that guidance.
Does it help with warped records?
It can improve seating for mildly warped records by increasing contact at the center. Severe warps may still require record flattening or replacement.
Will it scratch my label?
The underside includes a felt interface intended to protect the label during normal use.
Why Buy From Us
- Compatibility guidance for spindle height and bearing/load considerations
- Setup recommendations for mats, isolation, and cartridge alignment to maximize results
- Accessories pairing help (brushes, cleaning, anti-static solutions)
- Careful fulfillment and long-term technical support
Description
Pro-Ject Record Puck PRO
190g stabilizing record weight • Nickel-plated aluminum construction • Felt underside to protect labels • Helps improve platter coupling for cleaner timing and depth
Meet the Record Puck PRO
The Pro-Ject Record Puck PRO is a precision-machined stabilizing weight designed to improve the mechanical coupling between your vinyl record and turntable platter. By applying controlled mass at the record center, it helps flatten minor warps, reduce unwanted micro-vibration, and promote more consistent energy transfer into the platter—often perceived as improved timing, firmer bass definition, and more stable imaging.
Fit note: Check your spindle height. With a record on the platter, exposed spindle height should be ≤ 10.5mm when using this puck.
Highlights & Benefits
- Improved record-to-platter contact — helps stabilize the disc for more consistent playback behavior.
- Reduced unwanted vibration — controlled mass can lessen micro-movement that smears transients and softens bass edges.
- Optimizes mildly warped records — assists with firmer seating against the platter surface for better tracking consistency.
- Label-safe underside — felt mat on the bottom helps protect the record label during use.
- Turntable-friendly mass — 190g is designed to deliver stabilization without over-burdening many quality bearings.
- Elegant, durable finish — the Pro-Ject Record Puck PRO uses nickel-plated aluminum for a premium appearance and long-term wear resistance.
Technology & Design
Mass coupling principle — record weights apply downward force at the center label area, improving contact and reducing the tendency for the disc to flex or vibrate during playback.
Nickel-plated aluminum body — a rigid, precision-machined structure designed for stable contact and consistent handling.
Felt underside interface — a protective layer that helps prevent label scuffing while maintaining secure, quiet contact.
Used with an appropriate platter mat and a well-isolated deck, the Pro-Ject Record Puck PRO can help tighten leading-edge clarity and improve perceived depth by stabilizing the record during playback.
FAQ — Record Puck PRO
Will it work with any turntable?
It is broadly compatible, but you should confirm spindle height clearance. With a record on the platter, exposed spindle height should be ≤ 10.5mm when using this puck.
Is a record weight the same as a clamp?
No. A weight relies on mass to improve coupling. A clamp typically uses a mechanical locking action. Both can be effective; the best choice depends on bearing design and platter/mat behavior.
Could it stress my turntable bearing?
At 190g, it is designed to be a sensible mass for many turntables. If your manufacturer advises against added platter loads, follow that guidance.
Does it help with warped records?
It can improve seating for mildly warped records by increasing contact at the center. Severe warps may still require record flattening or replacement.
Will it scratch my label?
The underside includes a felt interface intended to protect the label during normal use.
Why Buy From Us
- Compatibility guidance for spindle height and bearing/load considerations
- Setup recommendations for mats, isolation, and cartridge alignment to maximize results
- Accessories pairing help (brushes, cleaning, anti-static solutions)
- Careful fulfillment and long-term technical support
